FREE TEXT QUERY  
  GUIDED SEARCH  
  VIEW ALL SOLUTIONS  

Knowledge Base:
  
 




Feedback
Please rate this solution.
 Excellent
 Good
 Average
 Fair
 Poor
This solution solved my problem.
 Yes
 No
Suggestions for improvement.
(Please include your email address if you would like to hear from us).
 


Search Result
Solution # K24424710
Title In Cisco CallManager 4.x, no ringback is heard when IVR tries to transfer a call to the IP phone of an Agent
Core Issue Scenario:

 IVR----H323 (call leg 2)-----CCM----MGCP (call leg 1)----PSTN

      |------------H323 (call leg 3)---------|    Agent IP phone

Call leg 1 and call leg 2 are the incoming call to the IVR, and call leg 3 is a new h323 session for IVR to transfer the call to Agent's IP phone.

In Cisco CallManager 4.x, when an inbound call from a Public Switched Telephone Number (PSTN) hits the Interactive Voice Response (IVR), Cisco CallManager uses one h323 session in order to setup the call with IVR, and when IVR transfers the call to an agent, it sets up a second h323 session to Cisco CallManager. When the IP phone rings, Cisco CallManager sends h225 information to IVR in the second h323 leg in order to indicate ringback on, and IVR passes this h225 ringback information to the first h323 leg. But Cisco CallManager does not convert this information back to the Media Gateway Control Protocol (MGCP) gateway in order to request that the MGCP Gateway play the ringback during the transfer.

The issue is caused because
Callmanager is not be able to relay the h225 info ringback on message to mgcp message to request the gateway to play ringback tone while the call of first leg is active.
Resolution

In order to resolve this issue, change the Cisco CallManager cluster wide service parameter H225 Info for progress tone to Use ANN for Ring Back.

This enables Cisco CallManager to insert the Annunciator (Cisco CallManager Media Resource) to generate the in-band ringback to the caller. As a result, when the IP phone rings during the transfer, the Annunciator in Cisco CallManager generates the ringback tone and the caller hears the ringback.

Refer to Troubleshooting No Ringback Tone on ISDN-VoIP (H.323) Calls for more issues related to No Ringback.

Problem Type
Call connection (Connection quality: One-way audio, no busy tone, dropped calls, etc.)
Call control software (CallManager, CallManager Express, ICS7750, SRST, SS7 call agents)
Call Control CallManager
Call Connection Ringback tone
CallManager Features Supplementary services (Transfer, hold,forward, park, pickup, conference, callback, call waiting)
End Where Problem is Heard or Device Type Involved
IP phone
IVR or other automated system
CallManager Versions CallManager 4.x
Supplementary Services Call transfer
Voicemail, Conference, CRS/IPCC, Autoattendant and TTS/ASR Functions Interactive voice response (IVR)
Direct URL http://www.ciscotaccc.com/voice/showcase?case=K24424710