|
|
| Solution # |
K81779078 |
| Title |
Router boots in ROMmon and displays one of these messages on the console: loadprog: error - Invalid image for platform or loadprog: error - on file open |
| Core Issue |
The Cisco IOS® Software image is not appropriate for the router, or it is corrupted. |
| Resolution |
Erase the Flash, and download a new valid Cisco IOS Software image.
For information on how to erase the Flash, refer to PCMCIA Filesystem Compatibility Matrix and Filesystem Information
For software upgrade information, refer to the document that applies to your platform:
- Cisco IOS Software Upgrade Procedure for Cisco 801, 802, 803, 804, and 805 Series Routers
- Upgrading Cisco IOS Software for the Cisco 806, 826, 827, 828, and SOHO70 Routers
- Software Upgrade Procedure
for the 1000, 1400, 1600-R, 1700, 2600, 3600, 3700, 4000, 4500, 4700, AS5300, and the MC3810
- Software Installation and Upgrade Procedure for the 1600, 2000, 2500, 3000, AS5100, and AS5200
- Software Installation and Upgrade Procedures for the RP and RSP7000, 7100, 7200, 7300, 7400, 7500, 7600, 10000 (ESR), 12000, uBR71XX, uBR72XX, and uBR10000
- Upgrading IOS Software on Cisco AS5800 Access Servers
|
| Problem Type |
Error message received
Boot issues |
| Booting Problems |
Boots in ROMMON |
| When Problem Occurs |
After software upgrade |
| Error Messages and Warnings |
loadprog: error - Invalid image for platform
loadprog: error - on file open |
| Direct URL |
http://www.ciscotaccc.com/core/showcase?case=K81779078 |
|
|
